SoftNAS now supports the set up of highly available VPCs with private subnets using virtual IPs. Elastic IP setup is still supported for legacy purposes. However, Virtual IP setup, more secure because it does not require a public facing IP, is our recommended best practice.
Secure Administrative Access in VPC
Without a public facing IP, the only way to access a Virtual IP VPC is by connecting to the private subnet upon which it is based. There are multiple ways to configure secure administrative access to the SoftNAS SNAP HA™ storage controllers:
- VPN - this is the most secure stand-alone solution, and a recommended minimum best practice for limiting access to the private IPs of each SoftNAS Cloud® controller. In this case, use DNS to assign a common name to each controller (e.g., "nas01.localdomain.com", "nas02.localdomain.com"), making routing to each SoftNAS Cloud® controller convenient for administrators
- Admin Desktop - an even more secure approach is to combine VPN access with an Administrator's desktop, (sometimes referred to as a jumpbox) typically running Windows and accessed via RDP. This secure admin desktop adds another layer of authentication, namely Active Directory (or local account) authentication. Once an administrator has gained secure, encrypted access to the Admin Desktop, she opens up a web browser to connect to the SoftNAS StorageCenter™ controller.
Amazon Private IP AWS Installation Overview
This section describes how to set up an Amazon AWS Virtual Private Cloud (VPC) in high availability (HA) mode to work with SoftNAS SNAP HA™.
The following is required:
Note: The HA IAM Role is caps sensitive, and must be named SoftNAS_HA_IAM.
SoftNAS Setup for Virtual IPs
If setting up SoftNAS SNAP HA with virtual IPs, there is no need to create Elastic IPs. A total of 3 IP addresses will be required. The two IPs statically assigned or assigned via DHCP to your VPCs at instance creation time can be retained. Each VPC instance must have an IP in the same CIDR block. A third, human-configured (chosen by you) IP outside this CIDR block will be selected during the HA wizard setup.
This 3rd IP address will be used to access the share. More information on adding IP addresses to your AWS/SoftNAS VPC can be found in IP Addressing in your VPC.
Setting Up for SNAP HA™
To set up SoftNAS for SNAP HA™, log into the SoftNAS Cloud® instances and access storage via the SoftNAS StorageCenter™ interface. Via the SoftNAS StorageCenter™ interface, set up SoftNAS Cloud® with the required Disk Devices, Storage Pools, and Volumes. Once this is complete for both instances, set up replication and SoftNAS SNAP HA™.
Log In to SoftNAS StorageCenter™
Logging in to SoftNAS StorageCenter™ requires the public IP of the SoftNAS Cloud® instance, as well as the Instance ID (default password).
The SoftNAS StorageCenter™ interface will load.
Setting Up SoftNAS Cloud®
After accessing the SoftNAS StorageCenter™ interface, set up the Disk Devices, Storage Pools, and Volumes that will ultimately be required for SNAP HA™.
For more information, see the document SoftNAS Installation Guide.
Note: When setting up storage pools for replication, they have to have the same name or replication will not work properly. Also, a volume must be created on the source side node.
Setting Up Replication and SNAP HA™
Set up Replication
- Log on to a SoftNAS Cloud® instance and select the SnapReplicate / SNAP HA™ menu in the file tree.
- Click Add Replication.
- Enter the private IP for Ethernet 0 of the secondary node to be replicated to from AWS setup.
- Provide this private IP address when prompted by the SoftNAS StorageCenter wizard, as seen below.
- Provide the SoftNAS Cloud® instance credentials.
- Click Finish.
This will establish replication.
Set Up HA
- From the SoftNAS SnapReplicate™ panel, click on Add SNAP HA and click Next.
- Select the type of HA you want to use. In this case we are creating a Virtual IP set up. Select Virtual IP.
- Add the remaining Virtual IP which was previously configured in AWS. This is the 3rd Virtual IP that we previously selected/created that is outside the CIDR block of the two instances. This IP is chosen by you, and requires no configuration. Select any IP address that is outside the CIDR block of the IPs selected for each SoftNAS instance.
- Provide the Amazon IAM User credentials that will be used with SoftNAS Cloud®. Click Next.
- Click Finish.